I don’t go to my local scrapbook store, Memory Bound, every week (although I think about it!), but I visited the store Friday evening after I received an e-mail that announced some new Tim Holtz products had arrived. If you’ve been reading my posts here, then you know already that I am a Tim Holtz fan. I use his Distress ink stamp pads, some of the Distress ink markers and paints, own all three of his technique books, and have many of his paper cutting dies and other paper crafting tools.
The items described in the Memory Bound e-mail included the Tim Holtz Distress Refresher, Distress Sprayer, Distress Micro Glaze, and DIY Distress Ink Pad, all of which are described on Tim Holtz’ Web site HERE. I was pretty sure I could use the first three products, but wasn’t sure about the DIY Distress Ink Pad. Here’s what I learned about these accessories, designed to work with the Tim Holtz Distress line of products. If you’re unfamiliar with the inks, their main advantage is that they are water-reactive and that you can create interesting and beautiful blending effects with them.
The Tim Holtz Distress Refresher is an essential accessory if you use Distress ink stamp pads, markers or paints because it prolongs the life of your products. It is made of a mixture of water and gel, designed to moisturize and condition your stamp pads, the brush tips of your markers, and the foam applicator tops of your paint bottles. When your stamp pad begins to get dry, you don’t necessarily need to re-ink it, but can instead spray the pad once or twice with Distress Refresher, then close the lid and wait about five minutes to let the liquid soak in. For the markers, do the same: spray once or twice, cap the marker, and wait five minutes before using. Spray your non-stick craft mat once or twice with the Distress Refresher, turn your Distress Paint bottle upside down, and swish the foam applicator in the liquid a few times, cap it, and once more, wait five minutes.
The Tim Holtz Distress Sprayer is an empty spray bottle, but not an ordinary one. Tim Holtz points out in his video, Distress Sprayer, that every sprayer is different, which is why you don’t always get the same results he does in his tutorials or trade show demonstrations. The Tim Holtz Distress Sprayer is designed specifically to hold water (although you could technically mix up your own colored or glitter sprays), and has a button in the trigger head that blocks water flow if you want to pack the bottle in a bag and not have it leak. When you depress the trigger fully, the sprayer releases a fine, even spray. If you depress the trigger partially, it releases water clumplets, which create a specific blending effect that’s different from when you use a fine spray. The bottle holds four ounces of water, where many other brands of craft spray bottles hold two ounces.
Tim Holtz Distress Micro Glaze sells in a one-ounce jar and is my favorite new accessory of the four described in this post. Inside is a paste-like product that reminds me of wax. The purpose of this product is to prevent Distress inks from reacting with water once your work of art is finished. Tim Holtz says the product is the result of a collaboration between Ranger Ink and Skycraft, the original maker of the micro glaze.
You put a little bit on your fingertip, and rub it into any porous surface, let it dry, and then buff off the excess with a clean cloth or paper towel. A little bit goes a long way. You can use Distress Micro Glaze with any of the Tim Holtz Distress products, but also with any watercolor products, markers that react with water, inkjet-printed art, and basically anything that needs to be water-resistant. If you visit the Skycraft About page, it describes even more uses for the petroleum-based, acid-free product with a slight citrus-y scent. You can even use it to make leather stain-resistant, on metals to prevent rust and corrosion, and on wood to protect and polish it. A little while ago I wrote a post about an address book I created that featured a watercolor effect on the cover using Distress inks. I hadn’t listed it in my shop yet because I wanted to come up with a solution that prevented the inks from running if someone accidentally spilled a drop of water or other liquid on it. This was the solution. As you can tell from the photo, the micro glaze is clear and matte when dry, and none of the inks smeared when I applied it.The final new Distress accessory from Tim Holtz, described in this post, is the DIY Distress Ink Pad. This product is designed so that you can combine multiple Distress inks to make your own custom ink pad. You fill the eye dropper from a Distress Re-inker with ink, then paint a narrow section of the pad with ink. Repeat this with other colors until the white stamp pad is completely filled with color. Then take a credit card or plastic scraping tool, and pull down the length of the stripes you’ve created to drive the ink down into the pad. Then cover the stamp pad with the provided lid, and let it sit for 10 minutes before using the pad. The lid is covered with a special paper that takes the custom ink, so go ahead and roll a brayer over the stamp pad, and then roll out your custom color on the lid so you’ll know at a glance what your custom color looks like. To be honest, this is probably the accessory for which I have the least use. I tend to ink up spots on a craft mat with my Distress inks, and then paint with the inks–either with a dry paint brush or a wet one, and that allows me to create any custom colors I need. But if you want a larger amount of a custom color that you plan on using often, the DIY Distress Ink Pad is the way to go.
Â© 2015 Judy Nolan. All rights reserved.